- High and Low pass Filters
- Temperature controlled Fans
- Speaker switch-on delay
- Protected against short circuit, overheating, and DC voltage
- Independent level controls
- LED indication for signal overload
Warrior Elite 1800w Amplifier
|
|
|
The Warrior Elite 1800w amplifier has been designed for durability and reliability without disregarding professional sound quality. This amplifier exhibits very low level of noise and distortion, each amplifier is designed for rugged use and intended to last. The Elite 1800w can operated conventionally or in bridge mode, internal filters give high and low outputs. For permanent installations the inputs can be hard wired via screw terminals.
|
|
|
| Specifications | |
| Main Output (Speakon Sockets & Terminals) | 2 x 900WRMS @2Ω |
| 2 x 675WRMS @4Ω | |
| 2 x 400WRMS @8Ω | |
| 1 x 1800WRMS @4Ω Bridged | |
| 1 x 1250WRMS @8Ω Bridged | |
| Line Level Input (XLR Sockets & Terminals) | 1V/20kΩ Balanced |
| Frequency Response | 10Hz - 20kHz |
| THD | <0.1% |
| Power Supply Requirements | 230V~50Hz |
| Dimensions (W x H x D) | 483 x 89 x 380mm (2U) |
| Weight | 20.5kg |
| Specifications subject to technical modifications | |
| Order Code | Price | ||
| 440-508 | Warrior Elite 1k8 Amplifier |
£204.00 |
each |
|
All Prices are in Sterling and exclude VAT |
|||
|
|
 |
|
 |
 |
 |
 |
 |
|
|
| Tel: 0191 251 4363 | Fax: 0191 252 2296 | info@theelectronicsshop.co.uk |
• How to Order from this site • Orders accepted subject to our Terms & Conditions • ESR Electronic Components 2007
