W-Audio Horizon 300 Amplifier
Main Output Speakon Line Level Input XLR & Jack
Sockets
W
Audio Horizon 300 Amplifier has all the control functions
conveniently located on the front panel. Two control knobs
adjust each of the channel's input sensitivity whilst front
panel LED's indicate the amplifiers operational and signal
level status, facilities also include a ground lift switch
and a low cut filter .The Horizon 300 amplifier is extremely well
constructed a large PCB spans the full width of the rugged
steel chassis, housing the power supply and extensive
filtering components required by a switch-mode amplifier
whilst a low-profile cooling fan draws air through the back
panel and forces it through the amplifier, exhausting it
through a front-panel vent. The W Audio Horizon 300
Amplifier offers tremendous headroom in either bridged mono
or stereo modes. A punchier, tight bottom end and dynamics
are effortless at high volumes, with crisp and snappy
transients. The fan speed with no signal present idles
slowly, but it speeds up immediately to match the demand of
even moderate signal levels, returning to idle the instant
as soon as demand is reduced.
Specifications:
2 x 150WRMS @4Ω
2 x 100WRMS @8Ω
Selectable 0.775, 1.0 and 1.44V
Frequency Response
20Hz - 20kHz
THD
<0.1%
Slew Rate
20v/µs
SNR
>100db
Power Supply
230V~50Hz
Dimensions
483 x 88 x 225mm (1U)
Weight
4.5kg
Download Handbook
>
Order Code
Each
440-500
W Audio Horizon 300 Amplifier
100.00
 |
Tel: 0845 251 4363 Fax: 0191 252 2296 |
|||
|
• Place your Order here • Orders accepted subject to our Terms and Conditions • All Prices are in Pounds Sterling and Exclude VAT |
||||