Dap Audio P-500
Amplifier
 |
| Specifications: |
| Main Output Binding Posts and Speakon
Sockets |
2 x 160WRMS @8Ω |
| |
2 x 250WRMS @4Ω |
| |
1 x 500WRMS @8Ω Bridged |
| Line Level Input XLR & ¼" Jack Sockets |
0.775V/20kΩ Balanced |
| Frequency Response |
20Hz - 20kHz |
| THD@4Ω |
<0.05% |
| S/N Ratio |
103dB |
| Crosstalk |
<60dB |
| Damping Factor |
300:1,1 KHz@8Ω |
| Slew Rate |
40V/µs |
| Power Supply |
230V~50Hz 6A |
| Dimensions |
483 x 89 x 400mm (2U) |
| Weight |
22kg |
|
Specifications subject to technical
modifications. |
| Download the Handbook
> |
 |
|
|
The
Dap Audio P-500 amplifier is a 250
+ 250 Watt RMS stereo amplifier
housed in a standard 2U 19" rack case, each channel has independent level
control. LED indication for signal, clip and protection are provided on the
facia. There is a separate
variable speed cooling fan for each channel, and the amplifier accepts balanced inputs
on XLR and ¼"
Jack. The speaker outputs are located on the rear panel and use Speakon or
4mm terminal posts. |
 |
| Order Code |
|
1+ |
|
|
446-132 |
Dap Audio P500 Amplifier 250 + 250 Watts |
153.00
140.00 |
|
|
|
USB 7473 12" Speaker Cabinet
 |
|
Specifications: |
|
System |
12" Speaker |
| |
1.75" CD Horn |
|
Connection |
2 x Speakon Sockets |
|
Power Rating |
450W
RMS |
|
Impedance |
8Ω |
|
Frequency Response |
40Hz - 20kHz |
|
Sensitivity |
98dB/m |
|
Dimensions |
720 x 420 x 410mm |
|
Weight |
26.1kg |
|
Subject to technical
modifications. |
|
|
The USB 7473 speaker cabinet was designed in the USA and
manufactured under license in China. The USB 7473 is the perfect 2-way
speaker solution for professional live sound applications where
linearity in reproduction and extremely accurate high frequency
reproduction is required. Provided with speakon connectors and finished
with black epoxy paint. These 2-way cabinets produce outstanding results
when used in conjunction with USB 7437 subs. |
| Order Code |
|
1+ |
|
|
USB 7473 |
Full Range 12" Speaker Cabinet 450 Watt |
154.00
147.00 |
|
|
|
Skytec TEC6500
Amplifier
 |
| Specifications: |
| Main Output Speakon Sockets |
2 x 250WRMS @4Ω |
| Line Level Input RCA, ¼" Jack Socket
& XLR |
0.775V/10kΩ |
| Frequency Response |
20Hz - 20kHz |
| THD |
<0.05% |
| S/N Ratio |
>90dB |
| Crosstalk |
>50dB |
| Power Supply |
230V~50Hz 1100VA |
| Dimensions |
482 x 88 x 330mm (2U) |
| Weight |
10.5kg |
|
Specifications subject to technical
modifications. |
| Download the Handbook
> |
 |
|
|
The TEC6500 amplifier has been designed and built to
exacting standards The amplifier features a proven bi-polar transistor output stage, a
generously rated power supply with toroidal transformer. The amplifiers are
constructed on a single high quality double-sided PCB and are kept cool by a
highly efficient forced air cooling system. |
 |
| Order Code |
|
1+ |
|
|
TEC6500 |
Skytec Stereo Amplifier 250 + 250 Watts |
155.00
140.00 |
|
|
|
iSolution 5mW Green Laser
 |
- 5-Channel DMX
- Stand alone or master/slave mode
- Music controlled via built-in microphone
- Built in programmes
- FAT Beam Technology
- 68º Beam Angle
|
Specifications: |
|
Control Method |
Built-in/DMX |
|
Laser |
5.0 or 30mW Green Diode 532nm Class 3R |
|
Power
Supply |
230V~50Hz |
|
Dimensions |
205 x 320 x 100mm |
|
Weight |
2.24Kg |
|
Subject to technical
modifications. |
| Download the Handbook
> |
 |
| Watch a Movie Clip
here > |
 |
|
|
The ilaser from iSolution is available in two models, ILS-505 4.9mW or
ILS-530 30mW. The laser effect uses the latest FAT BEAM technology for
improved safety and continuous scanning, both models use a green Class 3R
laser. The ilaser is pre-programmed with several geometric patterns which
can be controlled with any standard DMX controller or the CA-8 controller.
The ilaser can be operated as a stand-alone effect, moving to the beat of
the music via its internal microphone or can be linked
together in master-slave mode to produce a synchronized
light show.
|
  |
| Order Code |
|
1+ |
|
|
440-910 |
iSolution ILS-505G 5mW Green Laser |
189.00
123.00 |
|
|
|
Dap Audio Gig 8
 |
| Specifications: |
| Mono Input Microphone XLR Socket |
Electronically Balanced 150Ω |
| Mono Input Line Level ¼" Jack Socket |
Electronically Balanced |
| Gain |
+10dB to +60dB |
| Equalization |
|
| Low Shelving |
80 Hz ± 15dB and Low
Cut |
| Mid Range |
2.5 kHz ± 15dB |
| Hi Shelving |
12 kHz ± 15dB |
| Stereo Input Line Level ¼" Jack Socket |
Unbalanced |
| Equalization |
|
| Low Shelving |
80 Hz ± 15dB |
| Mid Range |
2.5 kHz ± 15dB |
| Hi Shelving |
12 kHz ± 15dB |
| Frequency Response |
10Hz - 55kHz |
| THD |
0.01% |
| Master Mix Section |
|
| Headphone Output ¼" Jack Socket |
≥8Ω |
| Main Output ¼" Jack Socket |
Unbalanced |
| Aux Send ¼" Jack Socket |
Unbalanced |
| Control Room ¼" Jack Socket |
Unbalanced |
| Power Supply |
230V~ 2 x 20V 500mA (Supplied) |
| Dimensions |
230 x 270 x 65mm |
| Weight |
3kg |
|
Subject to technical
modifications. |
| Download the Handbook > |
 |
|
 |
-
4-Mono channels with XLR and balanced line inputs.
-
2-Stereo input channels with balanced TRS jacks.
-
3-Band EQ on all channels.
-
48 volt phantom power supply.
-
High quality sealed Panasonic® Potentiometers.
The Dap Audio Gig
8 mixer is a small compact 8 channel mixer which is ideal for a home recording studio or small
venues. The use of ultra low noise components and good design ensures high
headroom and wide dynamic range.
The mono channels will accept microphone or
line level signals, they have a gain control, 3-band EQ, low cut filter, peak
level LED, auxiliary send (Post Fade) and pan pot. The stereo channels accept line
level signals, they have a 3-band EQ, auxiliary send and pan pot. The mixer
also has 2-stereo auxiliary line return inputs.
The main output offers separate
master mix, control room and headphone outputs there is also front panel
connections for record/playback. The main output is monitored on high
accurate 10 segment LED bargraph meters. Mounting plates are supplied with
this mixer to enable it to be fitted into standard 19" rack housings.
|
| Order Code |
|
1+ |
|
|
446-203 |
Gig 8 Live Mixer |
83.71
79.00 |
|
|
|
Flower
Firestorm Rotoscan
Showtec Chasy
 |
|
Specifications: |
| Functions |
Chase |
| Output Connection |
Terminal |
| Audio Input |
None |
| Channel Load |
5A (resistive only) |
| Power Supply |
230V~50Hz |
| Dimensions |
192 x 48 x 145mm |
| Weight |
Kg |
|
Subject to technical modifications. |
|
|
The Showtec Chasy is a 4-channel light chaser which has 12 built-in
programmes. The choice of light pattern is selected by a single push switch
on the front panel, there is a choice of 3 speeds to select from. |
|
Order Code |
|
1+ |
|
|
447-372 |
Showtec Chasy (Terminal strip for Hard wiring
installations) |
41.21
37.41 |
|
|
|
Firestorm Barrel