-
Tough "Road-proof" housing
-
Bridge Mode
-
LED Clip Indication
-
Balanced Input
-
Speakon Output connectors
-
19" Rack mount case
Dap Audio P-500 Amplifier
The Dap P 500 power amp can be used as a disco amplifier for mobile Dj's or can be used as a PA amplifier with bands and solo artists. When used in conjunction with similar amplifiers and controllers it can be part of a large PA rig.
|
|
|
The Dap Audio P-500 amplifier has been completely redesigned, inspired by the vintage classic look of the valve amplifier.
The 250 + 250 Watt RMS stereo amplifier is housed in a standard 2U 19" rack case, each channel has independent level control. LED indication for signal, clip and protection are provided on the facia. There is a separate variable speed cooling fan for each channel, and the amplifier accepts balanced inputs on XLR and ¼" Jack. The speaker outputs are located on the rear panel and use Speakon or 4mm terminal posts.
|
|
 |
| Specifications | |
| Main Output (Binding Posts and Speakon Sockets) | 2 x 160WRMS @8Ω |
| 2 x 250WRMS @4Ω | |
| 1 x 500WRMS @8Ω Bridged | |
| Line Level Input (XLR & ¼" Jack Socket) | 0.775V/20kΩ Balanced |
| Frequency Response | 20Hz - 20kHz |
| THD@4Ω | <0.05% |
| S/N Ratio | 103dB |
| Crosstalk | <60dB |
| Damping Factor | 300:1,1 KHz@8Ω |
| Slew Rate | 40V/µs |
| Power Supply Requirements | 230V~50Hz 6A |
| Dimensions (W x H x D) | 483 x 89 x 400mm (2U) |
| Weight | 22kg |
| Specifications subject to technical modifications | |
| Order Code | Price | ||
| 446-132 | Dap Audio P500 Amplifier 250 + 250 Watts |
£140.00 |
each |
|
All Prices are in Sterling and exclude VAT |
|||
|
|
 |
|
 |
 |
 |
 |
 |
|
|
| Tel: 0191 251 4363 | Fax: 0191 252 2296 | info@theelectronicsshop.co.uk |
• How to Order from this site • Orders accepted subject to our Terms & Conditions • ESR Electronic Components 2007
