!
!
Velleman
5410329066000
Delivery time:1-5 Days
K6600
Weight: kg

Multitone Chime Kit K6600

  Constructional Kit: Easy
This device is a simple and economic way of generating electronic tones. This kit is primarily intended for use as a replacement for the traditional mechanical doorbell. Of course, it can also be used for many other types of applications. The number of tones may be selected up to a maximum of three, each of which is output one after the other. This can be used to help locate the place being called. Volume and tone can also be set. The existing bell transformer can be used as a power supply.
Dimensions: 53 x 59mm (PCB)
Power Supply: 6-9Vac / 200mA (idle current <10µA)
Velleman
Delivery time:1-5 Days
K6706B

2-Channel RF Code Lock Transmitter Kit (Blue)

No Longer Available
This transmitter is suited to control the RF code lock receivers K6707 (one channel) and K6727 (two channels). A choice can be made from over 8000 codes.
Dimensions:
Power Supply: 12V Battery (23A)
Velleman
Delivery time:1-5 Days
K6706G

2-Channel RF Code Lock Transmitter Kit (Grey) K6706

No Longer Available
This transmitter is suited to control the RF code lock receivers K6707 (one channel) and K6727 (two channels). A choice can be made from over 8000 codes.
Dimensions:
Power Supply: 12V Battery (23A)
Velleman
5410329067144
Delivery time:1-5 Days
K6714
Weight: kg

Universal Relay Card (8 Relay's) Kit K6714

 No longer available, see K6714-16

 

If you want to switch large electric currents using an electronic control and require control isolation at the same time, then this card is a valuable asset.
Dimensions: 150 x 212mm (PCB)
Power Supply: 115 or 240Vac / 12VA
Velleman
5410329167141
Delivery time:1-5 Days
K6714-16
Weight: kg

Universal Relay Card (16 Relay's) Kit K6714-16

No Longer available
16 relays and screw connectors included ! Power supply transformer is included. Output 12V DC can be used as a power supply for other kits: K6714, K8023,... Every output of the print can be equipped with a noise suppressor network.
Dimensions: 150 x 212mm (PCB)
Power Supply: 115 or 220Vac / 12VA
Velleman
5410329071059
Delivery time:1-5 Days
K7105
Weight: kg

Handheld LCD Osciloscope Kit

No Longer available
This handheld scope features options never seen in its category. It is packed with handy features which enables you to perform on-the-spot measurements quick, easy and accurate. Its high-contrast, wide viewing angle LCD screen enables operation under normal daylight conditions. All functions are accessible by means of a tactile keyboard with a pleasant touch feeling. The current operating mode is displayed on-screen. If desired, auto-setup mode takes care of all scope settings for instant visualisation of waveforms. The marker function enables you to make accurate measurements of voltage, time and frequency. Acting as a DVM, it displays True RMS, dB, peak-to-peak and DC volts. With its built-in variable gain sine generator, it allows easy service of audio equipment, etc.… Probe transient response can be adjusted using the calibration output. Finally, a RS232 port enables screen data to be sent to a PC for use in different applications. A charge circuit with indicator LED for rechargeable batteries is provided.
Dimensions: 130 x 230 x 43mm
Power Supply: 9Vdc / 300mA
Velleman
5410329080006
Delivery time:1-5 Days
K8000
Weight: kg

PC Interface Board Kit

No Longer Available
To enable a computer to communicate with the outside world, it is usually fitted with a keyboard, a display and perhaps a mouse. If however it is to be used in certain control applications, or certain control functions are to be carried out, then an interface is needed. The interface card here excels in its simplicity of use and installation. The card is connected in a very simple way to the printer port (there is no need to open up the computer). Likewise there is no need to install an extra printer port, even if a printer is to be used. This can be connected to the card in the usual manner. Connection to the computer is optically isolated, so that damage to the computer from the card is not possible. The card is controlled in a simple way using Turbo Pascal, QBasic, Visual Basic, Delphi, C++ (to use with MS-DOS, Win3.11, Win95, 98, ME, NT, XP, 2000). These procedures are pre-programmed and are provided along with a number of test and example programs on the diskette supplied. The card itself has 16 optically isolated digital connections, which can be freely chosen as either inputs or outputs (eg. 6 inputs and 10 outputs) according to how they are set up by the user. Furthermore, the card has 9 analogue outputs, of which one is high precision, and 4 analogue inputs. If this capacity is not sufficient for a particular application then up to 4 cards can be connected together (1 master and 3 slaves), such that an enormous potential exists. The card can be used with many of our other kits such as : K6714 16 channel relay card, K8023 10-channel 2-wire remote control.
Dimensions: 237 x 133mm (PCB)
Power Supply: 230Vac
Velleman
5410329080082
Delivery time:1-5 Days
K8008
Weight: kg

Multifunction Relay Module Kit K8008

  Constructional Kit: Average
No Longer Available
14 different functions including timers, switching, flashing, interval, random switching, ... Two pre-programmed delays. Learning mode for delays of 2 sec. up to 12 days. Pushbutton control (with home modular light system K8006). EEPROM for delay time storage in case of power failure. On-board transient filter for relay contacts or load (selectable). Suitable for control of incandescent lighting, halogen lighting, fluorescent lighting, fans, valves, buzzers, ...
Dimensions: 65 x 57 x 25mm
Power Supply: 110-125 or 220-240Vac 50/60Hz
Velleman
5410329080099
Delivery time:1-5 Days
K8009

Multifunctional Clock Kit

No Longer Available
6 x 36mm high digits. Time, Date & temperature indication, selectable with toggle option. 1 sec. resolution chronometer with lap function. Count down function to a specific date, the last day H:M:S are displayed. Scoreboard function (two players or teams, count up to 199). Random generator from 00 to 99. 2 digit dice. Count function. Chime beep option. Relay output for temperature control or time alarm. US or Europe display option for time, date, degrees Celsius or Fahrenheit format. All functions and settings are wireless remote controlled (wired remote is possible). Optional extra remote control type K8059 or VM130T
Dimensions: 255 x 80mm (PCB)
Power Supply: 12Vdc / 300mA
Velleman
5410329080129
Delivery time:1-5 Days
K8012
Weight: kg

Lead Acid Battery Charger/Conditioner Kit

No Longer Available

This lead-acid battery charger/conditioner is suitable for charging and maintaining both open and sealed type 6 or 12V lead-acid batteries. Charging current : 0.3 or 1A. The battery can be hooked-up to the unit for an indefinite time, and will be kept in optimal condition. Battery type and charging current are selectable, while the charging process is fully automatic.
Dimensions: 97 x 140 x 40mm
Power Supply:

18Vac / 25VA

Velleman
5410329080174
Delivery time:1-5 Days
K8017
Weight: kg

3-Channel Sound Light with Microphone Kit K8017

  Constructional Kit: Average
Low, mid and high channels. Sensitivity adjustment per channel. LED indication per channel. Attractive translucent enclosure. Microphone included. Noise suppressed according to EN55015
Dimensions: 155 x 45 x 160mm
Power Supply: 110-125 or 220-240Vac 50/60Hz
Velleman
5410329080204
Delivery time:1-5 Days
K8020
Weight: kg

Valve Control Amplifier Kit

No Longer Available
Valve Control Amplifier Kit
Dimensions: 290 x 165 x 68mm
Power Supply: 115 or 230Vac 16W
Velleman
5410329080211
Delivery time:1-5 Days
K8021

High-End Control Amplifier Kit

No longer available
High-End Control Amplifier Kit
Dimensions: 290 x 165 x 68mm
Power Supply: 115 or 230Vac 6W
Velleman
5410329216641
Delivery time:1-5 Days
K8027
Weight: kg

Relay Output Module (for K8006) Kit K8027

  Constructional Kit: Normal
This switching module can be plugged into our K8006 base unit. Can be used to switch lamps or other domestic loads. To be controlled via push buttons, switches or one of our control modules or kits such as the K8046 touch screen keyboard, the K8000 PC interface, etc
Dimensions: 65 x 57 x 25mm
Power Supply: 110-240Vac 50/60Hz
Velleman
5410329080297
Delivery time:1-5 Days
K8029
Weight: kg

Slow On-Off Dimmer Kit K8029

No Longer Available
Microprocessor controlled. Dual mode operation :* Slow on / Slow off dimmer with two independent and programmable delays. Dimming direction changes with each key press. Manual level control is possible. This mode also simulates a 'regular' dimmer. * Light is turned on at full power for a programmable time, after which it slowly fades to zero, also during a programmable time.
Dimensions: 67 x 57 x 25mm
Power Supply: 110-125 or 220-240Vac 50/60Hz
Velleman
5410329080310
Delivery time:1-5 Days
K8031
Weight: kg

1 Channel Digital PC Scope Kit

No longer available
The K8031 is a digital storage oscilloscope, using a computer and its monitor to display waveforms. All standard oscilloscope functions are available in the Windows program supplied. Its operation is just like a normal oscilloscope. Connection is through the computer's parallel port, the scope is completely optically isolated from the computer port.
Dimensions: 230 x 165 x 45mm
Power Supply: 9-10Vdc / 300mA
Velleman
5410329080365
Delivery time:1-5 Days
K8036
Weight: kg

Video Signal Cleaner Kit K8036

  Constructional Kit: Average

Digitally cleans the video signal / removes unwanted distortion in video signal, stabilises picture quality and luminance fluctuations, improves picture quality on LCD monitors or projectors. S-video and composite video in- and output (it is impossible to use S-video and composite video signals simultaneously). LED indication when distorted video signal detected. For PAL / NTSC video.
Warning: only use the K8036 to back up original video material of which you are the rightful owner (DVD, VHS, VCD, ...) check copyright information of the original material.

Dimensions: 100 x 84mm (PCB)
Power Supply: 9Vdc / 100mA
Velleman
5410329080402
Delivery time:1-5 Days
K8040
Weight: kg

High-End MOSFET Power Amp

No longer available
A no compromise high-end design power amplifier kit. It is ideal to place next to the speaker cabinet (short wires to the speaker). It features automatic switch on when input signal is sensed and goes in to stand by mode when no signal is present. The Kit includes an exclusive, high finish, solid aluminium enclosure.
Dimensions: 290 x 165 x 68mm
Power Supply: 115 or 230Vac 100W
Velleman
5410329223540
Delivery time:1-5 Days
K8046
Weight: kg

User-Definable 8-Channel Touch Panel Kit

No Longer Availble
Ever wanted your own keyboard with your personal layout and symbols ? Here is the solution : Now simply print YOUR keyboard layout on a transparent foil and make your own keyboard ! The function of each key can be selected (momentary or toggle) and each key is backlit. It is even possible to simulate classic "radio keys" (only one output can be ON, just like a rotary switch). One key can be defined as a preset memory or serve as an "all clear" key. Completing the features of this unique keyboard is a "click" sound when the keys are operated. The output can easily be connected to your own applications or to several of our kits. The K8045 LCD message board, the K6714 relay card, the K8006 light system bus unit, the K8000 computer interface, the K2633 or the K2634 power cards, the K8023 two wire remote
Dimensions: 165 x 90 x 35mm
Power Supply: 9Vac or 12Vdc / 250mA
Velleman
5410329238629
Delivery time:7-10 Days
K8048
Weight: kg

PIC Programmer and Experiment Board Kit K8048

 
Suitable for programming Microchip® FLASH PIC™ microcontrollers. For a full list of supported devices, see the FREE programming software available to download FREE before you buy - see link under more details.
Note, will not work through a USB to Serial converter.
Dimensions: 145 x 100mm (PCB)
Power Supply: 12Vdc Unregulated or 15Vdc Regulated / 300mA
Velleman
5410329241810
Delivery time:1-5 Days
K8050
Weight: kg

15-Channel IR Receiver Kit K8050

No Longer Available

An infra red receiver kit which works together with K6710, K8049, K8051, K8055, K8056, K6714, K6714-16, K2633. 15 open collector contacts: max. 50V/50mA, LED indication for each output, multiple IR sensors possible (type : IR38DM)

Dimensions: 71 x 114mm (PCB)
Power Supply: 8-14Vdc or 2 x 6-12Vac / 150mA
Velleman
5410329282257
Delivery time:1-5 Days
K8055
Weight: kg

USB Experiment Interface Board Kit

No Longer available - Replaced by K8055N
The K8055 interface board has 5 digital input channels and 8 digital output channels. In addition, there are two analogue inputs and two analogue outputs with 8 bit resolution. The number of inputs/outputs can be further expanded by connecting more (up to a maximum of four) cards to the PC's USB connectors. All communication routines are contained in a Dynamic Link Library (DLL). You may write custom Windows (98SE, 2000, Me, XP) applications in Delphi, Visual Basic, C++ Builder or any other 32-bit Windows application development tool that supports calls to a DLL
Dimensions: 145 x 88 x 25mm
Power Supply: 5Vdc via USB / 70mA
Velleman
5410329325329
Delivery time:1-5 Days
K8066
Weight: kg

3W Mono Amplifier Kit

No longer available
Small but powerful amplifier for a wide range of applications e.g. microphone amp, doorbell, melody generator, intercom, sound effects, headphones, radio receiver, PC sound card, musical instrument etc
Dimensions: 42 x 50mm (PCB)
Power Supply: 6-15Vdc / 500mA
Velleman
5410329328719
Delivery time:1-5 Days
K8068
Weight: kg

Dimmer for Electronic Transformers Kit K8068

  Constructional Kit: Professional
No Longer Available

 A 'PLUG-IN' module for use with our home modular light system K8006, suitable for incandescent lamps, mains voltage halogen lighting and low voltage halogen lighting in combination with an electronic transformer. Inductor and filter free, phase control technology with coolMOS™ FET-transistor. A brief push toggles on/off, while continued pushing engages dimming action. 'soft-start' feature to make lamps last as long as possible. Non volatile memory for last set light intensity, interference suppressor for reduced EMI, according to EN55015, LED status and error indication.

Dimensions: 65 x 57 x 25mm
Power Supply: 110-125 or 220-240Vac 50/60Hz
Velleman
5410329377243
Delivery time:1-5 Days
K8074
Weight: kg

USB to Remote control Transmitter Kit K8074

 No Longer Available
This unit will turn your computer into a powerful remote control. Simply connect to the USB port, install the driver and you are set. In total a combination of 255 cards can be addressed, resulting in a maximum of 2040 channels !!
Dimensions: 80 x 55 x 35mm
Power Supply: 5Vdc via USB