Retired Products

The following products are no longer available to purchase, however their details, supporting information & documentation remains available to assist your use with them or implementation of replacements.
!
Velleman
5410329035044
Delivery time:1-5 Days
K3504
Weight: kg

Car Alarm Kit K3504

No Longer available
The alarm detects sudden voltage drops of the battery when the interior, trunk, or hood lights are switched on. To ensure correct operation, a number of control indications have been included, such as : flashing LED to indicate that the alarm is in standby mode after a set time (after you have left the car). Pre-alarm (built-in buzzer) to indicate that the alarm is activated, so that you will not forget to switch it off. The alarm is easy to switch on and off, either automatically or by means of the ignition switch or a remote control unit, such as the K8059/K8057 or MK161/MK162
Dimensions: 62 x 100mm (PCB)
Power Supply: 12Vdc / 25mA
Velleman
5410329066000
Delivery time:1-5 Days
K6600
Weight: kg

Multitone Chime Kit K6600

  Constructional Kit: Easy
This device is a simple and economic way of generating electronic tones. This kit is primarily intended for use as a replacement for the traditional mechanical doorbell. Of course, it can also be used for many other types of applications. The number of tones may be selected up to a maximum of three, each of which is output one after the other. This can be used to help locate the place being called. Volume and tone can also be set. The existing bell transformer can be used as a power supply.
Dimensions: 53 x 59mm (PCB)
Power Supply: 6-9Vac / 200mA (idle current <10µA)
Velleman
5410329214043
Delivery time:1-5 Days
123-250

LAN Tester for RJ45, RJ12, RJ11, RJ10 & BNC VTLAN3

No Longer Available - Replaced by VTLAN6
Practical two-part network tester for wiring installations. Tests correct pin configurations of 10-Base-T (Cat 5), 10-Base-2 cable (coax), RJ45/RJ11 modular cables, 356A, TIA-568A/B and token ring cable systems. Remote cable tester unit can test cables installed up to 1000ft away either on wall plate or patch panel Easy-to-read display verifies cable continuity, open, short and cross-connect Comes complete with remote tester unit, RJ45 cable, RJ45 plug to RJ12 jack adaptor, 2 x BNC adaptor cables, BNC male - BNC male adaptor.
Power Supply: 9Vdc Battery (not included)
Dimensions:
Velleman
5410329479152
Delivery time:1-5 Days
123-255
Weight: kg

LAN Tester for RJ45, RJ12, RJ11, RJ10 VTLAN5

No Longer Available - Replaced by VTLAN6
This LAN tester for various cable types is indispensable in network installation and maintenance activities. This compact device can be used for testing network or telephone cables (RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P2C), RJ10 (4P4C)) and for most types of computer cables.
Power Supply: 9Vdc Battery (not included)
Dimensions:
Velleman
5410329309770
Delivery time:1-5 Days
126-120
Weight: kg

Replacement Test Lead set TLM1

No Longer Available - replaced by TLM68
PVC Test lead with protection caps, featuring 90° 4mm shrouded plugs for use with most multimeters. CAT II 1000V 15A
Dimensions: 135 x 15mm (Exc Leads)
Max Rating: 1000V / 10A
Lead Length:

77cm

Probe Size: 17 x 2mm
Velleman
5410329363802
Delivery time:1-5 Days
299-485
Weight: kg

Instrument Padded Carry Bag

No Longer Available

Soft padded carry bag for HPS140 & HPG1 Instruments

Replacement: General Purpose Padded Carry Bag

Velleman
Delivery time:1-5 Days
400-973

Enclosure for K2649, B2649

No Longer Available
This housing is suitable for Velleman K2649 Thermostat with LCD Kit
Ext Dimensions: 124 x 62 x 65mm
Colour: Off White
Material: ABS Plastic
Velleman
5410329304942
Delivery time:1-5 Days
400-981

Enclosure for K8009, B8009

No Longer Available
This housing is suitable for Velleman K8009 Multifunctional Clock Kit.
Ext Dimensions: 312 x 84 x 25mm
Colour: Black
Material: ABS Plastic
Velleman
5410329241773
Delivery time:1-5 Days
400-983

B8035 Multifunctional Counter Enclosure

No Longer Available
This housing is suitable for Velleman K8035 Multifunctional Up/Down Counter. The case can be panel or surface mounted. It is supplied with printed front bezel, 4 buttons, fixing screws and manual. The case can easily be re-sprayed in any colour of your choice.
Ext Dimensions: 124 x 73 x 30mm
Colour: Grey
Material: ABS Plastic
Velleman
5410329241780
Delivery time:1-5 Days
400-985

Bezel Enclosure B8045

No Longer Available
This housing is suitable for Velleman K8045 Programmable LCD Message Board. The case can be panel or surface mounted. It is supplied with printed front bezel, 4 buttons, fixing screws and manual. The case can easily be re-sprayed in any colour of your choice.
Ext Dimensions: 124 x 73 x 30mm
Colour: Grey
Material: ABS Plastic
Velleman
5410329424763
Delivery time:1-5 Days
400-986

Plexiglass Enclosure for K8099, CKB8099

No Longer Available
A pre-drilled plexiglass enclosure, designed to house the Velleman K8099 Nixie Clock Kit.
Ext Dimensions: 130 x 75 x 35mm
Colour: Smoked Brown
Material: Plexiglass
Velleman
5410329308315
Delivery time:1-5 Days
APS230
Weight: kg

Advanced Personal Scope 240MS/s APS230

No Longer Available

Advanced Personal Scope, 2 input channels, high contrast LCD with white backlight. Full auto set-up for volt/div and time/div. Recorder roll mode, up to 170h per screen, Trigger mode: run - normal - once - roll . Adjustable trigger level and slope, peak measurements: max, min. and pk to pk, measurements: rms, dB(rel), dBV, dBm and dBG. Direct Audio power measurements, x1 and x10 probe calculation option, several display modes, StereoScope mode for audio measurement, X and Y position shift. Battery pack included, fast charge possible.

In the box:
RS232 cable (9 pole sub D)
2 Insulated 60MHz X10 measuring probes
user manual
adaptor (110Vac 60Hz / 230Vac 50Hz)
battery pack
Advance Personal Scope unit

Velleman
5410329450878
Delivery time:1-5 Days
HPG1

Velleman 1MHz Pocket Function Generator HPG1

No Longer Available

Now you can take test signals on the move, 3 waveforms can be selected. Set the output voltage or frequency and select signal waveform using the on the screen menu. A powerful sweep function is also included. A handy piece of test equipment.
Velleman
5410329438289
Delivery time:1-5 Days
HPS140i
Weight: kg

Velleman Handheld Pocket Scope 40MS/s HPS140i

No longer available
This Oscilloscope packs al lot of power in a tiny box. Now you can really take a powerful oscilloscope everywhere. These features make the HPS140i indispensable to the professional user, service centres and even to the hobbyist. x1/x10 Oscilloscope Probe INCLUDED.
Dimensions: 74 x 114 x 29mm
Power Supply: NiMh Battery included
No of Ranges:
Range Mode:
Extra Features: Audio Power measurement, Probe Included
Velleman
5410329300401
Delivery time:1-5 Days
HPS40
Weight: kg

Personal Scope 40MS/s

No longer Available - Replaced by HPS50

Velleman's goal with the HPS40 was to develop a user-friendly, feature-packed and genuinely "hand-held" oscilloscope. A number of characteristics were on our wish list: low noise, high sensitivity, modest weight, a backlit LCD and a choice between regular batteries or rechargeable ones. Furthermore, the scope also offers a selection of 5 different screen layouts. Both novices and professional users will admire the fast and fully automatic setup function, allowing them to perform measurements without physically touching the unit! Floating measurements are completely safe thanks to the battery-powered operation and the (included) fully insulated measuring probe. These features make the HSP40 indispensable to the professional user, service centres and even to the hobbyist.
Velleman
5410329414498
Delivery time:1-5 Days
HPS50
Weight: kg

Velleman Handheld Scope with USB interface HPS50

No Longer Available
Designed By electronics enthusiasts For electronics enthusiasts! Powerful, compact and USB connectivity, this sums up the features of this oscilloscope. The large keyboard and bright LCD makes this unit a breeze to use, combine this with great specifications and you wonder how you ever managed without it! HPS50 Handheld Oscilloscope includes universal power supply, insulated measurement probe x1 / x10 and USB connection cable.
Velleman
5410329026455
Delivery time:1-5 Days
K2645

Geiger-Muller Counter Kit

No Longer Available
This kit provides an acoustic measurement of radiation levels. The sensitivity is at its highest for gamma rays and high energy beta rays. The assembly is compact and may be mounted into a small box, together with the 9V-battery.
Dimensions: 99 x 54 x 25mm
Power Supply: 9V Battery (not inc)
Velleman
5410329026455
Delivery time:1-5 Days
K2649
Weight: kg

Thermostat with LCD Kit

No longer Available

Presision digital thermostat with wide temperature range and adjustable hysteresis. Can be calabrated in Celcius or Fahrenheit. Additional connection for economy switch, e.g. to lower the temperature by a few degrees.
Dimensions: 124 x 62 x 65mm
Power Supply: 230Vac
Velleman
5410329026493
Delivery time:1-5 Days
K2651
Weight: kg

LCD Panel Meter Kit

No Longer Available
A digital meter is a lot easier to read and much more precise than its analogue equivalent. Moreover, this panel meter is comparable to an analogue one because a regulated power supply is no longer needed ; in many cases, an ordinary 9V battery is sufficient. As a result of the compact meter construction, there will never be problems finding a place to install it. It can easily be combined with an adapter circuit or sensor
Dimensions: 50 x 72mm (PCB)
Power Supply: 8-15Vdc or 9V Battery
Velleman
5410329026554
Delivery time:1-5 Days
K2655
Weight: kg

Electronic Watchdog Kit K2655

No Longer Available
A circuit that produces a natural sounding barking dog with a sensitive "ear" to everything that comes near it. It is a faithful watchdog, which never sleeps and never has to be taken out for a walk.
Dimensions: 142 x 75mm (PCB)
Power Supply: 9-12Vdc or 2 x 8Vac / 500mA
Velleman
5410329035006
Delivery time:1-5 Days
K3500
Weight: kg

Multifunction car Courtesy Light Kit K3500

No Longer Available

If, like most of us, you do not have infrared eyesight, then at times you have probably found yourself fumbling for the ignition switch or seat belt in the dark. For people like you we have developed this solution. With extra push button and battery protection.
Dimensions: 45 x 70mm (PCB)
Power Supply: 12Vdc / 13mA
Velleman
5410329035051
Delivery time:1-5 Days
K3505
Weight: kg

Car Light Warning Alarm Kit K3505

No Longer Available
This head light indicator may be set for one or two functions. To indicate that the headlights (or the sidelights) should be switched off after switching off the ignition contact (battery protection). Or to indicate that the head lights should be on once ignition contact is switched on (obligatory in some countries).
Dimensions: 48 x 57mm (PCB)
Power Supply: 12Vdc
Velleman
5410329312329
Delivery time:1-5 Days
K4004B
Weight: kg

200W Mono/Stereo Amplifier Kit K4004B

  Constructional Kit: Average
No longer available
Universal, robust and compact are the key words that describe this amplifier. A stereo or a mono amplifier, with three input sensitivity settings. Overload and short-circuit protection, protection against incorrect power supply polarity and thermal protection. Speaker transient suppression.
Dimensions: 210 x 85 x 64mm
Power Supply: +28Vdc & -28Vdc  K4006
Velleman
5410329315559
Delivery time:1-5 Days
K4005B
Weight: kg

400W Mono/Stereo Amplifier Kit K4005B

  Constructional Kit: Advanced
No Longer Available
Universal, robust and compact are the key words that describe this amplifier. A stereo or a mono amplifier, with three input sensitivity settings. Overload and short-circuit protection, protection against incorrect power supply polarity and thermal protection. Speaker transient suppression.
Dimensions: 350 x 62 x 85mm
Power Supply:

+35-40Vdc & -35-40Vdc / 2.5A (8Ohm)

+25-30Vdc & -25-30Vdc / 5A (4Ohm)

Velleman
5410329311568
Delivery time:1-5 Days
K4006
Weight: kg

Power Supply for K4004B and K4005B Kit

No longer available
A dedicated power supply board, designed for use with K4004B 200w Mono/Stereo power amplifier. Fitted with two reservoir capacitors (10000µf 50V), protection fuses and LED indicators. It can be used for any split rail power supply application.