!
!
BCL
Delivery time:3-5 Days
400-585/86

MB8 ABS Enclosure

Quantity discounts available
ABS enclosure, suitable for housing small electronic projects. The box has vertical grooves on the inside to allow for the securing of PCB's. All boxes supplied with lids, which are retained by 4 metric pozi head screws.
Ext Dimensions: 150 x 80 x 50m
Colour: Black or White
Material: ABS Plastic
Velleman
Delivery time:1-5 Days
400-59X
400-593

Black ABS Box WCAH Series

ABS enclosure which has vertical grooves on the inside to allow for the securing of PCB's. Can be easily drilled or punched, lids are retained by self tapping screws.
Colour: Black
Material: ABS Plastic
Gainta
Delivery time:1-5 Days
400-6XX

Dark Grey Enclosure G300 Series

These enclosures are manufactured from high impact dark grey ABS. The lid and the base are equipped with a tongue and groove sealing system with a neoprene gasket. The mounting holes and the lid fixing screws are located outside the seal area, preventing the ingress of moisture and dust. Internal guide slots allow the vertical mounting of printed circuit boards. The bosses on the internal base allow the horizontal fixing of PCB's or for the connection of terminals etc.
Colour: Grey
Material: ABS Plastic
Gainta
Delivery time:1-5 Days
400-7XX

Dark Grey Enclosure G400 Series

Ideally suited for instrumentation and telecommunication equipment, from hand held applications to lab and desktop sizes. Moulded in a high impact fire retardant dark grey ABS (UL94-VO). The G400 range of cases are moulded in plastic and have a two piece design. The tongue and groove joint between the top and bottom half offers environmental sealing to IP54 rating. The top and bottom case are lightly relived, creating a non scratch surface with a high quality finish. Guide slots are provided for vertical PCB mounting and internal bosses make horizontal PCB mounting possible.
Colour: Dark Grey
Material: ABS Plastic
Velleman
5410329378370
Delivery time:1-5 Days
400-908

DIN Rail project box VPB108

This enclosure was originally designed to house projects manufactured by Velleman, but can be used to house any small PCB, Relay or PSU. It has as a pre-drilled top for LED's or making internal adjustments to pots etc. The case can be used free standing or mounted on standard DIN Rail.
Ext Dimensions:

110 x 100 x 45mm
100 x 75mm (Max PCB size)

Colour: Black
Material: ABS Plastic
Velleman
5410329308773
Delivery time:1-5 Days
400-975

Enclosure for K5600, B5600

This housing is suitable for Velleman K5600R (Red) Advertisement LED Display.
Ext Dimensions: 482 x 85 x 25mm
Colour: Black
Material: ABS Plastic
Velleman
5410329330514
Delivery time:1-5 Days
400-978

DIN Rail Module B8006

The housing is suitable for Velleman Domotica Light System K8006 It can accommodate busprint board and up to five plug-in units. It is also suitable for Velleman K8056, K8090, VM118, VM129 and VM8090
Ext Dimensions: 163 x 74/120 x 90mm
Colour: Clear/Green
Material: ABS Plastic
Teko
Delivery time:1-5 Days
400-987/9

Teko Pocket Enclosure OK17/9

These attractively styled enclosures were especially designed for "hand-held" instruments. The cases are in scratch-resistant ABS. The case parts are joined using 2/4 self-tapping screws. The enclosures have a recessed area suitable for membrane keyboards or aluminium panels.
Ext Dimensions: 165 x 103 x 38.5mm
Colour: White or Black
Material: ABS Plastic
Teko
Delivery time:3-5 Days
401-8XX

Teko Grey Enclosure AUS Series

The enclosures are manufactured from ABS or high-impact polystyrene and are available with a front panel in either aluminium or plastic.
A polystyrene enclosure with a vented cover and base. Front and rear panels in 1mm-thick aluminium. Each half shell has integral PCB guides and mounting studs. Matt surface finish. Eight screws close the housing. Max PCB size: 170 x 162mm
Colour: Dark Grey
Material: ABS Plastic