IMG Stage Line LTR-102

Stage Line LTR-102 Line Transformer
Specifications:
Input XLR Female 600Ω
Output XLR Male 600Ω /150Ω
Optimum source impedance 50-600Ω
Maximum input voltage 5V
Optimum load impedance >2kΩ
Frequency Response 20Hz - 25kHz
Power Supply -
Dimensions 120 x 44 x 90mm
Weight 600g
Subject to technical modifications.
Download the Handbook > Download the Handbook for full specifications and applications
The LTR-106 line transformer offers DC separation in audio signal ways, reduces the output impedance for long cable runs. The LTR-102 has controls for ratio (1:1/600Ω to 2:1/150Ω), ground lift separation via ground lift switch and phase 0° to 180°. The inputs can either be ¼" Jack or XLR socket the outputs can also be by either method. When the front input jack is used the rear XLR socket is switched off, if the front ¼" jack output is used the rear XLR socket is switched off.
Order Code   1+  
LTR-102 Variable Line Transformer 27.13  

IMG Stage Line FGA-202

FGA-202 2 Channel Line Transformer
Specifications:
Input XLR/Jack Female 600Ω (Balanced)
Output XLR Male 600Ω (Balanced)
Power Supply -
Dimensions 75 x 55 x 125mmmm
Weight 650g
Subject to technical modifications.
IMG Stage Line FGA-202 is a professional 2-channel line transformer used to reduce or remove all signal interference and hum loops which may occur, when connecting several mixers or amplifiers together in large sound system installations. The FGA-202 is fitted with earth ground lift switch.
Order Code   1+  
FGA-202 2-Channel Line Transformer 33.95  

Dap Audio SC-12

Specifications:
Input XLR Female 600Ω (Balanced)
Output XLR Male 600Ω (Balanced)
Power Supply -
Dimensions 73 x 40 x 95mm
Weight 305g
Subject to technical modifications.
The SC-12 is intended to produced two balanced signals from one input signal. One direct (Straight Through) and one via a 600Ω isolating transformer. A ground lift switch has been provided to eliminate hum and noise caused by signal loops. All connections are via XLR plugs and sockets
Order Code   1+  
446-512 Dap Audio SC-12 Microphone Splitter Combiner 11.76  

IMG Stage Line FGA-40HQ

FGA-40HQ Ground Loop Isolator
Specifications:
Input RCA Sockets 12kΩ
Output RCA Sockets 12kΩ
Power Supply -
Dimensions 42 x 29 x 96mm
Weight 110g
Subject to technical modifications.
This unit was originally designed for use in the automotive industry, but has now found many uses in the PA and Disco market. This unit electrically isolates any stereo line level signal, it is ideal to insert between your lap top computer and amplifier or can be used to isolate any domestic CD, Video or tape player. It should effectively remove any mains borne interference caused by ground loops.
Order Code   1+  
FGA-40HQ Ground Loop Isolator 8.97  

IMG Stage Line FGA-102

IMG Stage Line FGA-102 Stereo Line Transformer
Specifications:
Input RCA Sockets 600Ω (Balanced)
Output RCA Sockets 600Ω (Balanced)
Power Supply -
Dimensions 75 x 55 x 125mmmm
Weight 650g
Subject to technical modifications.
FGA-102 is a professional stereo line transformer is used to reduce or remove all signal interference and hum loops which may occur, when connecting lap top computers or PC sound cards to audio mixers. The FGA-102 is housed in a strong robust case, making it ideal for on the road use.
Order Code   1+  
FGA-102 Stereo Line Transformer 26.57  

 

 

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

  
 

• Place your Order  here • Orders accepted subject to our Terms & Conditions •

All Prices are in Pounds Sterling and Exclude VAT