Mic/Line Level Signal Splitters

IMG Stage Line LMS-808

Specifications:
Outputs XLR male	Balanced 1V/200Ω
Inputs Microphone XLR female	Balanced 1mV/6.6kΩ
Inputs Line XLR female	Balanced100mV/40kΩ
Frequency Response	20Hz - 30kHz
S/N Ratio	81db
THD	<0.02%
Power Supply	230V~50Hz 10VA
Dimensions	482 x 48 x 200mm
Weight	2.9kg
Subject to technical modifications.

Download the Handbook >

IMG Stage Line LMS-808 is a Mic/Line mixer which can be operated in one of three modes. Mixer, for mixing up to 8 mono input signals (6 x line/mic and 2 x line) to 1 stereo output. Line splitter operation for splitting 2 mono line inputs to 6 mono outputs. Or it can be used for level matching amplifier operation for amplifying up to 6 input signals. The LMS-808 has 6 mono input channels, each with switched phantom power, pan control, signal/clip LED, and individual selection of the operational mode, and 2 mono line input channels, each with level control and signal/clip LED. All inputs and outputs use XLR connectors and will accept balanced or unbalanced signals.

Order Code		1+
LMS-808	Line/Mic Level Mixer or Signal Splitter	98.00

Dap Audio ASD-24

Specifications:
Outputs XLR male	300Ω Balanced 150Ω Unbalanced
Inputs XLR female	20kΩ Balanced 10kΩ Balanced
Frequency Response	20Hz - 20kHz
Dynamic Range	118db
THD	<0.03%
Power Supply	18V 500mA (AC Adaptor Supplied)
Dimensions	483 x 45 x 115mm
Weight	2kg
Subject to technical modifications.

Down load the Handbook here >

The ASD-24 is a low distortion, low noise signal distributor and a high quality addition to any studio or PA system. This powerful unit is a very useful tool and has several functions that will meet your highest expectations. Each input channel has been set up with parallel output connector so you can link to more distribution units. VU indicators show the input signal levels. Output levels are adjusted by pre-set potentiometers, which are located on the front panel. The ASD-24 can be used to distribute 1 input pair into 4 output pairs or 1 into 8 outputs.

Order Code		1+
446-960	ASD-24 Signal Distributor	73.00

IMG Stage Line LS-280

Specifications:
Outputs XLR male	1V/100Ω Balanced
Inputs XLR female	100mV/15kΩ Balanced
Frequency Response	20Hz - 20kHz
S/N Ratio	70db
THD	<0.03%
Power Supply	230V~50Hz 10VA
Dimensions	482 x 48 x 205mm
Weight	2.3kg
Subject to technical modifications.

Download the Handbook >

The LS-280 This versatile unit is a very useful tool for stage or studio use and can be used in two ways. It can be used to split a stereo signal into 4 outputs or it can be used to split a mono signal into 8 outputs. Each channel has individual input gain controls and peak level LED's, the outputs all have separate level controls. All inputs and outputs use XLR connectors and will accept balanced or unbalanced signals.

Order Code		1+
LS-280	8-Way Line Splitter	73.24

Behringer MX882

Specifications:
Outputs ¼" Jack sockets and XLR Male	60Ω Balanced 30Ω Unbalanced
Inputs ¼" Jack and XLR Sockets	50KΩ Balanced 25KΩ Unbalanced
Frequency Response	22Hz - 22kHz
S/N Ratio	-95db
THD	<0.002%
Power Supply	230V~50Hz 35 W
Dimensions	482.6 x 44.5 x 217mm
Weight	3kg
Subject to technical modifications.

Download the Handbook >

8 Channel Signal Router
8-in and 2-out Line mixer
2-in 8-out Signal splitter
6-in 6-out Signal conditioner

Behringers MX882 is a compact signal distribution wizard which has helped countless musicians and engineers solve diverse problems, whether as a signal splitter, line mixer or level conditioner. Regardless of your application, the MX882 keeps your signal paths short and clean. And its multiple matching amplifiers allow you to convert home-recording level to professional level and vice versa

Order Code		1+
MX882	Ultralink Pro Signal Router	57.80

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

Audio Solutions

Electronics

Home

• Place your Order here • Orders accepted subject to our Terms & Conditions •

All Prices are in Pounds Sterling and Exclude VAT