Dap Audio SC-15

Specifications:
Input RCA Socket Unbalanced
Output ¼" Jack Socket TRS Unbalanced
Power Supply 12 - 18V DC
Dimensions 95 x 40 x 73mm
Weight 289g
Subject to technical modifications.
The Dap Audio SC-15 is used to amplify an RIAA equalized magnetic signal from a turntable cartridge, to give a high level line level signal suitable for the input of an amplifier.
Order Code   1+  
446-515 SC-15 Stereo RIAA Pre-Amplifier 17.47  

Dap Audio SC-14

Dap Audio SC-14 Microphone Pre-Amplifier
Specifications:
Input ¼" and XLR Female Balanced +10dbV
Output ¼" and XLR Male Balanced +4dbV
THD 0.001%
Power Supply 12V DC
Dimensions 113 x 40 x 73mm
Weight 349g
Subject to technical modifications.
The Dap Audio SC-14 is designed to provide a small, simple, and inexpensive microphone pre amplification for a variety of applications. The unit has both XLR and ¼" inputs and outputs a single gain control with clip indication. Phantom powering is included for use with condenser microphones. The ¼" output is specially designed for use as either a mono unbalanced output or a stereo headphone output. The unit comes complete with power adaptor.
Order Code   1+  
446-514 SC-14 Mini Microphone Pre-Amplifier 23.62  

Dap Audio SC-13

Dap Audio SC-13 Two Way Stereo Convertor
Specifications:
Input RCA Socket +22db Unbalanced
Input XLR Socket +22db Balanced
Output RCA Socket +12dbUnbalanced
Output XLR Plug +18dbBalanced
THD 0.003%
Power Supply 12V DC
Dimensions 143 x 45 x 93mm
Weight 527g
Subject to technical modifications.
One side of the SC-13 converts consumer level stereo (Phono) line level signals to balanced (XLR) professional line level signals and the other side converts professional signal levels (XLR) to consumer (Phono) signals. Each side has a stereo level control and a LED indicates power is applied to unit.
Dap Audio SC-13 Two Way Stereo Convertor Rear
Order Code   1+  
446-513 SC-13 Two Way Stereo Converter 28.00  

IMG Stage Line MPR-6

IMG Stage Line MPR-6 Microphone Pre-amplifier
Specifications:
Input ¼" Jack Sockets 10kΩ
Output RCA Sockets 47kΩ
Frequency Response 5Hz - 40kHz
Power Supply 12V DC 100mA
Dimensions 67x37x121mm
Weight 215g
Subject to technical modifications.
Download the Handbook > Download the Handbook for full specifications and applications
ING Stage Line MPR-6 is used for connecting one or two microphones to a line level input of an amplifier or mixer.
Order Code   1+  
MPR-6 Microphone Pre-amplifier 22.93  

 

 

sales@esr.co.uk

Tel: 0845 251 4363

Fax: 0191 252 2296

  
 

• Place your Order  here • Orders accepted subject to our Terms & Conditions •

All Prices are in Pounds Sterling and Exclude VAT