Adastra 120W Slave Amplifier
 |
- 8 Ohm and 100V line outputs
- 2U 19" Rack Mountable
- Peak and Signal LEDs
- Mains and Battery Operation
|
The Adastra 120W
slave amplifier is for use with the 900 series mixer amplifiers or with any
other suitable source. Featuring phono sockets for input and output signals,
front located master volume control. Signal and peak LED indicators for
visual reading of the amplifiers performance. The 900
series amplifiers are housed in strong metal cases (2U) supplied with
separate brackets for mounting into 19" rack cabinets. All amplifiers are
fully protected for short circuit and overload with fuse protection for the
DC power supply.
| Specifications |
| Main Output < 2% THD |
120WRMS 8Ω
and 100v Line |
| Line Output/Slave (RCA Phono Sockets) |
1V 600Ω |
| Line Level Input (RCA Phono
Sockets) |
300mV 10kΩ |
| Frequency Response |
100Hz - 12kHz |
| THD |
< 2%
@ 120 W |
| S/N Ratio |
>92dB |
| Power Supply Requirements |
230V~50Hz |
| |
24Vdc 8A |
| Dimensions (W x H x D) |
425 x 88 x 230mm |
| Weight |
9.5kg |
| Specifications subject to technical
modifications |
| Order Code |
|
Price |
| 443-975 |
Adastra 120W Slave Amplifier |
£100.00 |
each |
|
All Prices are in Sterling and
exclude VAT |
• How to
Order from this site
• Orders accepted subject to our
Terms & Conditions •
ESR Electronic Components 2007
